Graphic Controller	Integrated in Processors
Video Memory	DVMT
Video Interface	● 1 x HDMI type A connector  ● 1 x DVI-D connector  ● 1 x dedicated combo connector (VGA/USB/audio/power)

 

Storage

SATA	● 2 x SATA III port with power connector
CF	● 1 x Compact Flash Type I/II slot support UDMA 33
Disk Bay	● 1 x swappable 2.5" HDD bay with Anti-vibration / Anti-shock solution

 

Communication

Ethernet	● 2 x Intel GbE chip via RJ-45 connector
USB	● 4 x USB 3.0 connector
Serial Port	● 2 x RS232 (1 x DB9, 1 x pin header)  ● 1 x RS232/422/485 (DB9, switch selectable)

 

I/O

Expansion slot	● 2 x mini PCIe (For Optional 3.5G / Wifi module only)
GPIO	● 8-bit GPIO (4 In, 4 Out)
Antenna Hole	● 1 x SMA for GPS  ● 1 x SMA for 3.5G  ● 2 x SMA for WiFi  ● 1 x SMA for Bluetooth
SIM	SIM Slot x 1, SIM card changeable without opening case
Security	Support I-Button for driver ID
CAN BUS	Support CAN 2.0A/2.0B protocol

Others Feature

Audio	Audio Codec (Line-out & MIC)
Hardware Monitoring	CPU voltage and temperature
WatchDog Time	1~255 sec. software programmable
Indicator	Power / HDD/ Stauts LED

 

Power Requirement

Power Input	9~32 V (+/-5%) single voltage input, 3 poles terminal block
Power Consumption	Max 80W (i7 CPU)

OS Support

● Windows XP  ● Windows 7  ● Fedora 14  ● Ubuntu 10

Mechanical & Environment

Thermal Design	Fanless
Chassis Material	SECC + Aluminum heatsink
Vibration	IEC 60068-2-64, 5~500Hz, 3GRMS(CF/SSD), Operating with SSD
Shock	IEC 60068-2-27, 50G 500m/s2 11MS, Operating with SSD
Dimension	310mm x 195mm x 80mm
Weight	6 kg
Operating Temp.	0~60°C
Storage Temp.	-40~80°C
Relative Humidity	0~90% @ 40°C, non-condensing
Safety	CE, FCC class B, E-Mark

Smart In-Vehicle Power Management

O/S Anti-Crash	Smart O/S boot/shut-down control by power subsystem
System boot /  Shut-down delay	Delay time from 0 seconds to 60 minutes setting in BIOS
System boot fail retry	3 times boot fail retry
Power on/off switches	● System power switch by remote cable switch  ● System power input serial connection to car battery and ignition switch
Car battery protection	Low battery voltage monitoring and configurable auto shutdown low battery   voltage level

 

Packing List

● 1 x AIV-HM76V0FL

● 1 x User Guide & System Driver CD

● 2 x Wall Mount Bracket

● 1 x Screw pack(2.5” HDD bracket: 4pcs)

● 1 x Terminal block female 3pin

● 1 x Spare Fuse 10A

● 1 x GPIO/CAN/Driver ID DB15 Cable

● 1 x Remote Switch Cable

● 1 x One to Many Combo Cable